E-Z LAKE "No Fuss Flush" - The No-Fuss Way to Flush Your Inboard Marine Engine

E-Z LAKE "No Fuss Flush" - The No-Fuss Way to Flush Your Inboard Marine Engine

$34.95
Skip to product information
E-Z LAKE "No Fuss Flush" - The No-Fuss Way to Flush Your Inboard Marine Engine

E-Z LAKE® Marine Maintenance

E-Z LAKE "No Fuss Flush" - The No-Fuss Way to Flush Your Inboard Marine Engine

$34.95

Shipping to entire US

Satisfaction guaranteed

Patent pending

Designed in the USA

E-Z LAKE® No Fuss Flush™

Copy this URL to your browser for a demo:  https://youtu.be/UK-_vYp6iIs

Connect. Flush. Done.

Stop fighting with complicated marine engine flushing setups. 

No need to crawl under the boat!

The E-Z LAKE® No Fuss Flush™ puts fresh water directly where your marine engine needs it—quickly, simply, and without permanent installation.

🚤 NO FUSS. JUST FLUSH.

CONNECT
No Fuss Flush to raw water pump inlet.  Attach your garden hose to the No Fuss Flush.  Raw water inlet is typically 1.1" diameter (28mm).  The rubber coupler is flexible and can accommodate up to 1.375" connection.

CONTROL
Use the integrated on/off valve to control water flow. 

FLUSH
Fresh water flows directly to your engine's raw-water inlet and pump.

REMOVE
When you're finished, disconnect it and store it away. It's ready for next time.


WHY BOAT OWNERS WILL LOVE IT

⚡ QUICK & SIMPLE
Get your engine connected to fresh water without complicated plumbing.

🔧 NO PERMANENT INSTALLATION
Use it when you need it. Remove it when you're done.

💧 DIRECT WATER FLOW
Delivers fresh water directly to the engine's raw-water inlet.


YOUR ENGINE. YOUR HOSE. NO FUSS.

Whether you're flushing after a day on the water, servicing your engine, or warming it up on the trailer, No Fuss Flush makes the job easier.

Less setup. Less mess. Less hassle.

E-Z LAKE® No Fuss Flush™

The simple way to get water where it needs to go.

How to use it
  1. With the engine off, connect your garden hose to the No Fuss Flush.
  2. Position the device on the raw-water inlet and turn on your water supply.
  3. Open the built-in valve to set the flow, then start the engine.
  4. When finished, shut the engine off, disconnect, and store.
Shipping & guarantee

Shipping is a flat rate of $5.95 for all US locations. Every purchase is backed by our satisfaction guarantee. Contact us with any questions.

Safety first
  • Install and remove with the engine off.
  • Confirm a sufficient water supply before starting the engine.
  • Keep the device and hose clear of moving parts.
  • Do not exceed normal operating temperature.

Disclosures

Install with engine off • Ensure proper water supply • Not responsible for engine damage • Proper and safe orientation of device • Patent Pending • Not intended or rated for pressurizing

Ensure proper water supply

Not responsible for engine damage

Ensure device is properly installed, water supply is sufficient, and do not exceed operating temperature range.

Proper and safe orientation of device

Make sure device is clear of moving parts

Patent Pending

Not intended or rated for pressurizing

When engine is running and water is flowing, there is no pressure against the raw water pump assembly

FAQ

Good questions from fellow boaters

What does the No Fuss Flush connect to?

A standard garden hose on one end and your inboard engine's raw-water inlet on the other. If you have a hose, you have everything you need.

Do I have to install anything permanently?

No. There is no permanent plumbing and nothing to modify on your boat. Connect it when you need it, then disconnect and store it.

How do I control the water flow?

The built-in valve lets you set the flow right at the device, so you are not running back and forth to the spigot.

When should I use it?

After every outing, before and during routine servicing, and any time you need to run your inboard on the trailer.

Will it work on my boat?

The No Fuss Flush is built for inboard marine engines. Not sure about your setup? Send us your boat and engine model and we will confirm before you buy.

Any safety tips?
  • Install and remove the device with the engine off.
  • Make sure your water supply is on and sufficient before starting the engine.
  • Keep the device and hose clear of all moving parts.
  • Do not exceed your engine's normal operating temperature.
How much is shipping?

Shipping is a flat rate of $5.95 for all US locations.

What if it is not right for me?

Every order is backed by our satisfaction guarantee. Reach out and we will make it right.

Still have a question? Contact us and a real person will get back to you.